消防系统常见故障排除（Common troubleshooting of fire systems）.docVIP

下载本文档

5
0
约8.71千字
约 7页
2017-08-04 发布于河南
举报
版权申诉

消防系统常见故障排除（Common troubleshooting of fire systems）.doc

1、本文档共7页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

消防系统常见故障排除（Common troubleshooting of fire systems） Automatic fire alarm system 1 of (1) detector: smoke detector, heat detector and flame detector. (2) manual alarm device: manual alarm button. (3) alarm detector: regional alarm, centralized alarm, control center alarm. 2. Main functions of the system When the fire broke out, the probe will fire signal transmission to the alarm controller, and by sound and light signals, and on the control panel shows the part of the fire, so as to achieve the aim of prediction of fire. At the same time, the manual alarm function can be completed by manual alarm button. 3. The problems caused by the system are easy to occur, the causes of the generation and the simple processing methods (1) detector error alarm, detector fault alarm. Reason: the detectors sensitivity selection is not reasonable, the environment humidity is too big, the wind speed is too big, the dust is too big, the mechanical vibration, the detector USES time too long, the device parameter decreases etc. Treatment method: according to the installation environment select the appropriate sensitivity detector, the installation should avoid the tuyere and the high speed of the passage, regular inspection, according to the situation to clean and replace the detector. (2) manual button error alarm, manual button fault alarm. Reason: the button USES too long, the parameter drops, or the button is damaged. Processing method: check regularly, and replace the damaged timely, so as not to affect the operation of the system. (3) failure of alarm controller. Cause: the fault of the mechanical device or the external detector and the manual button caused the alarm controller to fail and alarm the fire alarm. Treatment: check the machine itself, troubleshoot, or press 1.2 to check whether the fault is caused by the outside world. (4) line failure. Reason: the insulation layer is damaged, the joint is loose, the humidity of the environment is too large, the insulation is reduced. P