干洗步骤（Dry cleaning steps）.doc

干洗步骤（Dry cleaning steps） The first step, pretreatment, is to stain treatment. It is artificial YongZhuJi pollution serious dirt and stain insoluble in dry cleaning solvent (such as fruit juice, nail polish, paint, ink, etc.) for processing in advance, not water, coated with washing clothes, washing in the water again. Step 2, master wash. Put the pretreated clothes in the dryer and wash them thoroughly with dry cleaning solvent. The third step, after treatment, the main purpose is to remove residual dry cleaning solvent and ironing. Some common problems and countermeasures in dry-cleaning process Accident 1: why does the button become more and more fragmented Problem: a pair of button-down jackets broke apart after two regular dry cleaning. Dry cleaning is carried out according to the instructions of the maintenance label. Reason: the button used plastic can not withstand the regular dry cleaning cycle and the rear-impact dry cleaning principle It is. Responsibility: there is no warning mark on the maintenance label. Therefore, the responsibility is borne by the manufacturer. If the maintenance label has a horizontal line cleaner, it should be held responsible. Accident two: the black bead adornment is melted Question: when a material for flash acetate purple clothes in the label instructions after four pce dry cleaning, black bead decorations become soft, melting, leaving only ugly black stain, the clothes have such stains. Reason: this kind of pendants cant be subjected to tetrachloroethylene washing, as long as it is immersed in tetrachloroethylene 2 minutes will dissolve. The description of the maintenance label is indicated by conjecture, and there is no effort to verify its accuracy. Responsibility: should be borne by the manufacturer, unable to recover. Accident 3: questions about metal decorations Problem: a piece of fabric around the neck of a ring of metal decorations after dry cleaning of shrinkage, wrinkling. Why: if the decorations are made of different