网站大量收购独家精品文档,联系QQ:2885784924

安全装置常见故障和处理方法(Common faults and treatment methods for safety devices).doc

安全装置常见故障和处理方法(Common faults and treatment methods for safety devices).doc

  1. 1、本文档共33页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
安全装置常见故障和处理方法(Common faults and treatment methods for safety devices) Displacement sensor, weighing sensor, light screen sensor, flat layer sensor, speed encoder, etc. The third part Common faults and treatment methods for safety devices 1 Emergency stop circuit failure The phenomenon of Emergency stop relay ( Voltage relay ) Dont suck.  why In the elevators emergency power line, the coil of the emergency relay is generally closed with the following security switches In series, such as the pit stop switch, the speed limit switch, the safety window switch, the car top urgent stop switch, the car inside urgent Stop switch, safety clamp switch, Phase-sequence relay contact, Towing motor relay contact and arrears Contact, Steel band switch, etc. The cut-off of any of these switches will cause the stop relay coil to break The electric release makes the control circuit of the elevator fail to start.  Processing method 1. Check the cause of safety switch failure and repair. 2. Maintain safety switch on a regular basis As a reliable. In operation, it is absolutely forbidden to use wire short switch contact, leading to the operation of the elevator.  2 The limit switch does not drop the brake  The phenomenon of The elevator is at the end of the terminal, and the car can not touch the limit switch.  why The gap between the car and the shaft is too large or the pressure is too small, and the tension can not be passed to the limit On the switch ratchet, the switch cant pull down.  Processing method Adjust the gap between the car and the wheel should be in a proper way to reduce the volume of the steel wire rope Have enough pull to pass to the limit switch.  Adjust the required 1. When the elevator is slow to exceed the terminating distance, Limit switch should be sensitive. 2. Limit switch In the action, the cage can surpass the distance of the upper and lower ends of the car should be in 50 ~ 200 mm It is.  3 Door interlock switch failed  The phenomenon of The door lo

您可能关注的文档

文档评论(0)

jgx3536 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:6111134150000003

1亿VIP精品文档

相关文档