锌合金（Kirsite）.docVIP

锌合金（Kirsite） Zinc alloy zinc, alloy [edit this paragraph] [overview] An alloy consisting of other elements based on zinc. The alloy elements are aluminum, copper, magnesium, cadmium, lead and titanium. Zinc alloy has low melting point, good fluidity, easy welding, brazing and plastic processing. It is resistant to corrosion in the atmosphere, and waste materials are easy to recycle and remelting. But the creep strength is low and natural aging is easy to cause dimensional change. Prepared by melt method, die casting or press work. According to the manufacturing process can be divided into casting zinc alloy and deformed zinc alloy. The main elements of zinc alloy of aluminum, copper and magnesium. The zinc alloy by processing can be divided into two types of deformation and casting zinc alloy. The fluidity of the alloy and zinc alloy has good corrosion resistance, suitable for die casting instrumentation, automotive parts such as shell. [Edit] [zinc alloy composition and casting quality] First, the characteristics of zinc alloy 1. is more important than that. 2., good casting performance, can die casting complex shape, thin-walled precision parts, casting surface smooth. 3. surface treatment: plating, spraying, painting. 4. when melting and die-casting, do not absorb iron, do not corrode press type, do not stick mould. 5. good mechanical properties and wear resistance at normal temperature. 6. low melting point, melting at 385 degrees, easy to die casting. Problems to be paid attention to in the process of using: 1., poor corrosion resistance. When the impurities in alloy composition lead, cadmium and tin exceed the standard, they lead to the aging of the casting and deformation, which is characterized by volume swelling, mechanical properties, especially plasticity decreased significantly, and even a long time rupture. The solubility of lead, tin, cadmium in zinc alloy is very small, so focus on the grain boundary and become the cathode aluminum rich solid solution