箱涵工程施工方案（Box culvert engineering construction scheme）.docVIP

下载本文档

0
0
约1.33万字
约 12页
2017-08-04 发布于河南
举报
版权申诉

箱涵工程施工方案（Box culvert engineering construction scheme）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

箱涵工程施工方案（Box culvert engineering construction scheme） Box culvert engineering construction scheme One, K30 + 381 box contains an overview. The box culvert for 1-6 x 3 box culvert, direction and route Angle of 800, culvert length 37.29 m, 373.74 m3, C30 concrete reinforced 1753.8 kg grade I and grade II reinforced 42316.6 kg this box culvert is scheduled to start on August 25, 20 xx years, before 25 September 20 xx years to finish. Ii. Culvert construction scheme. 1. Technical preparation. 1) construction lofting. According to the design requirements, the traverse points approved by the supervision engineer shall use the coordinate method of the whole station to set out the position of the center and the axes. 2) sand, stone materials, cement, steel bars and other needs are inspected and qualified. 3) approved by the supervision engineer of the concrete matching report. 4) make technical disclosure to the construction team. 2. Construction process. 1) construction lofting. Use the whole station to measure the position of the center and axis of the culvert, and protect the position of the lofting pile. According to the design and construction needs, the excavation scope of the foundation pit is determined. Report the results to the supervision engineer for approval. 2) excavation. Excavator excavation is the main method of excavation excavation, and the artificial cooperation is the auxiliary. The excavator was excavated After close to the design elevation, the residual engineering quantity is made by artificial excavation to accurately control the base elevation of box culvert. When the basement seeps underground, the drainage is concentrated in the lateral excavation of the part of the base, and the drainage works are arranged during the whole construction process. When the substrate is processed, the base bearing capacity should be tested to ensure that it is not less than 111Kpa. According to the design in the base shop 30 cm thick gravel cushion, compacted with s