金属镀层（Metal coating）.docVIP

金属镀层（Metal coating） The characteristics and application of metal coating Galvanized 1. Name: galvanized galvanized yellow. That means, after galvanizing passivation, galvanized mainly because dull yellow color, a color blunt with galvanized sealant and other colors were closed, looks pure yellow. Using different zinc coating passivation agent can blunt different colors: white, black, blue, green color, etc.. Do not need to corrosion, oxidation treatment of zinc coating, zinc oxide after the surface is dark gray. 2. features: Zinc is relatively stable in dry air, and is not easy to change, in the water and moist atmosphere with oxygen or carbon dioxide generated oxide or alkaline zinc film can prevent further oxidation. Zinc plays a protective role. Zinc is very vulnerable to corrosion in acid and alkali and sulfide. The galvanized layer generally by passivation in chromate passivation in chromate solution or after the formation of the passivation film is not easy and moist air, anti-corrosion ability is greatly enhanced. The spring part, thin-walled parts (wall thickness less than 0.5mm) and high mechanical strength of steel parts, must carry on the removal of hydrogen, copper and copper alloy parts without removal of hydrogen. Galvanized low cost, easy processing and good effect. The standard potential of zinc is negative, so a lot of zinc coatings are metal anode coating. 3. application: used in atmospheric conditions and other favorable environment in the widespread use of galvanized steel parts. But it is not suitable for the friction parts of the coating. Cadmium plating 1. Name: cadmium plating. 2. features: in the marine atmosphere or water contact parts and hot water in the above 70 C, cadmium plating is relatively stable, strong corrosion resistance, good lubricity, dissolved in dilute hydrochloric acid is very slow, but is easily dissolved in nitric acid, insoluble in alkali, it is insoluble in oxide water. Cadmium plating than zinc plating soft, hydrogen