螺纹精度划分（Thread accuracy Division）.doc

螺纹精度划分（Thread accuracy Division） Thread A thread is a solid outer surface or inner surface of the cross section, there is a uniform spiral line convex shape. According to its structural features and uses Routes can be divided into three broad categories: (1) ordinary threads: the teeth are triangular in shape and are used for connecting or fastening parts. Ordinary threads are divided into coarse and fine thread by pitch The two kind of fine thread has higher connection strength. (two) driving thread: tooth shape has ladder, rectangle, saw shape and triangle etc.. (three) sealing threads: used for sealing connections, mainly for threads, taper threads and taper pipe threads. Two, thread matching level: The thread matching is the loose or tight size between the screw threads, and the mating grade is the gauge for the deviation and tolerance on the inside and outside threads Definite combination. (1) for unified inch threads, there are three kinds of thread: 1A, 2A and 3A, and there are three grades of internal thread: The 1B, 2B, and 3B levels are all gap fit. The higher the grade, the tighter the tie. Deviation in English thread Only the 1A and 2A levels are specified, the deviations from the 3A level are zero, and the class deviations of the 1A and 2A levels are equal. Professional knowledge Second pages, 36 pages The larger the number of grades, the less the tolerance, as shown: 1B 2B 3B internal thread Basic pitch diameter 3A external thread 2A 1A 1, 1A and 1B class, very loose tolerance level, which is suitable for internal and external thread tolerance match. 2, 2A and 2B class, is the British family of mechanical fasteners, the most common thread tolerance class. 3, 3A and 3B grade, spin forming the most tight fit, suitable for tight fasteners, for security critical design. 4, the external thread, 1A and 2A class has a matching tolerance, 3A class no.. Class 1A tolerances are greater than class 2A tolerances 50% is 75% larger than 3A, and 2B tolerance is 30% g