江苏省建设工程质量检查员岗位培训参考资料考试电子小抄第十四章 屋面工程（Jiangsu province construction project quality inspector job training reference material test electronic copy chapter xii roof project）.docVIP

江苏省建设工程质量检查员岗位培训参考资料考试电子小抄第十四章 屋面工程（Jiangsu province construction project quality inspector job training reference material test electronic copy chapter xii roof project） Chapter xii roof works 1. The code for acceptance of roof project quality GB50207 -- 2002:8 mandatory provisions 2. Sample reinspection of the raw material of waterproof roof. 1. Topic selection 1. The reasonable length of the waterproof grade of i-class waterproof layer shall be (D) year. A, 10 B, 15 C, 20 D, 25 2, roof engineering should be used according to the nature of the building, importance, function requirement and the waterproof layer is reasonable use fixed number of year, according to different levels fortification, roofing waterproof level is divided into (B) a level. A, three B, four C, five 3. The drainage slope of the flat surface of the rolling roof should meet the design requirements. The slope should not be less than (B). A, 2% B, 3% C, 5% 4. The inspection time of the roof shall not be less than (B) h. A, 12 B, 24 C, 48 5. Check the allowable deviation of the insulation layer (A). A, thickness B, flatness C, slope 6. The end of the winding head should be cut and inserted into the reserved groove, with the metal pressure bar fixed, the maximum nail distance should not be greater than (C) mm. A, 500 B, 700 C, 900 7. Horizontal roof drainage slope (A) should not be less than 3%. A, structure for slope B, material for slope 8. When the roof USES cement mortar to find the ordinary, the maximum press (C) meters to set the gap. A, 4 times 4, B, 5 times 5, C, 6 times 6 9. The overhead insulation products shall not be less than (B) mm from the gable wall or the parapet wall. A, 200 B, 250 C, 300 10. In the same situation, the paving of the waterproof layer of the flat roof is (B). A, perpendicular to the roof B, parallel to the roof C, optional 11. When construction of asphalt waterproofing rolling material slime, the length of the long edge shall not be less than (C) mm. A, 100 B, 120