汽车考试试题（Car test）.docVIP

汽车考试试题（Car test） One. Noun explanation. (10 points, a total of 5 questions) 1. Adjustment of engine 2. Use external features 3. Diesel speed regulation characteristics 4. The diesel engines oil supply is adjusted ahead of time The engine has all the features Two. Fill in the blanks. (20 points, 10 questions) 1. Widely used in modern electronic controlled gasoline injection engine was carried out on the engine exhaust gas purification, the harmful gases such as CO, HC and NOX compounds such as catalytic convert, and harmless gas discharged into the atmosphere. 2. The function of the throttle position sensor is to be transferred to and to be controlled in state time. There are two types of the type. The differential pressure valve in the k-type fuel injection system is to keep the oil supply pressure from changing, which is to ensure that the fuel volume distributor can control the internal and external sides of the tank. 4. The method of determination of oil supply advance Angle has two methods. 5. The function of fuel pressure regulator is to keep the difference value constant, usually. 6. Automobile engine gasoline injection system, according to whether the control system is closed can be divided into:. 7. The pressure of cylinder compression of gasoline engine is not lower than that of the original factory standard. Any two cylinder pressure difference should not be greater than the average value. The cylinder compression pressure of diesel engine should not be less than % of the standard value of the original plant. Any two cylinder pressure difference should not be greater than %. 8. The test of the engine is usually divided into, and, and Wait five classes. 9. The cause of the high temperature alarm lamp on the dashboard of the cab is available, or It is. 10. The engine is divided into four different types: different, different, different and different. Three. Problem of judgment. (10 points, 10 questions) 1. When the water temperature is too high, the car shou