钢结构取样（Sampling of steel structures）.doc

钢结构取样（Sampling of steel structures） Building steel structure detection sampling method and quantity The first part: witness sampling inspection First, the quality of steel To belong to one of the following conditions of steel, steel with retest analysis and chemical composition and mechanical properties of the sample: (1) foreign steel imports; (2) the mixed batch of steel; (3) the plate thickness equal to or greater than 40mm, and the design to the performance requirements of Z plate; (4) the structural safety level, the large span steel structure in the main stress components of the steel; (5) the design requirements of the re inspection of steel; (6) doubt on the quality of steel. 1, analysis of chemical composition (main control project) (1) test index: carbon, silicon, manganese, phosphorus, sulfur and other alloy elements (2) according to the standard GB/T20066-2006: Determination of samples for sampling and sample preparation method of iron and steel chemical composition Technical standard inspection of building structure GB/T50344-2004 (3) the sampling method and quantity: analysis of chemical composition of steel, according to the needs analysis of all components or ingredients. The sampling method used should ensure that the chemical composition analysis of samples can represent the average value of the sample product. Analysis of samples should remove surface coating, dehumidification, dust, and other forms of pollution removal. Analysis of samples should be as far as possible to avoid the pores, cracks, loose, burr, folding or other surface defects. The quality of the sample preparation should be large enough to be necessary for the re inspection. The crumb and powder samples, the quality is generally 100g. Can take the car, drilling, cutting, punching crumb sample preparation method. Preparation of drilling crumb sample method cannot be used when the sample should be cut or broken, and then use the crusher or vibration mill. A vibration mill grinding an