电视机修理实例（Television repair example）.doc

电视机修理实例（Television repair example） TV repair case Good friends, today nothing better, a good information found in finishing things (the original dry repair work, discarded notes) feel very pity, so it tidied, the early entry of colleagues or have a certain reference value, (very much can walk less detours) / / Color television standard electron gun G, R.B, three kinds of symbols are G = green gun; B = blue; R = red gun; the three electron guns are gate color kinescope, they share a common cathode. a Peacock color TV (1) 2188D 54cm21. The peacock flat color tv: Fault phenomenon: 1 sound, image, but is very dark. 2 power no movement, but two red lights are on, measuring and adjusting tube collector only 200V. 3 power no movement, but two red lights are on, use the remote control can be set to start, but the use of automatic search only can search the TV program and can not be stored, is the search to be able to see the show, but the automatic search is completed, but a program can not find it. Manual search, to find the program, and can see, but as long as the change in the boot or shutdown, and no TV programs. Solution: This machine is used to do M50436 chip microprocessor, with integrated block M58655 control block, which control the sound; light; electricity; and storage of TV programs, more than three kinds of fault M58655 is damaged, can be replaced. (2) the kQ54-39 color television set Fault phenomenon: when the red indicator light is not bright, according to users, this machine is a horizontal line at boot time, after a while no grating does not speak, machine inside out smoke. Solution: teardown inspection, found resistance to R371 burning, this resistance is 1/4 tile protection resistance, down by L450 through field investigation, found that the integrated block 7830, so that 7830 is damaged, replace, boot up normally. (3) the KQ54-39-6 color TV set Fault phenomenon: just boot up with grating and image, but a full screen appears very bright light, and there