电子工艺（Electronic process）.docVIP

电子工艺（Electronic process） Electronic process examination A general knowledge (basic knowledge), real knowledge 1. multiple-choice questions (40 points) 1) electronic technology is a design and production in electronic products plays an important role in the past have not pay attention to the (); A technology B technology disciplines, engineering disciplines, disciplines, science and technology D C 2) the main parameters of electronic components including parameters, specifications and (); A quality parameters, technical parameters, B parameters, D C data package 3) the allowable deviation of a common resistor + 5%, + 10%, + 20%, respectively) with letters (symbol of their accuracy; A J, N M, B J, K M, C K, J M, D J, M, K 4) quality factor inductance (Q value), can be defined as (); A Q = L / R, B / Q = L R, C Q = L R / D Q, omega = Omega L r; (5) the following frequency, low frequency) is usually suitable for frequency connectors; A 90MHz, B 80MHz, C 100MHz, D 120MHz 6) solder wire with diameter of 0.5mm, 0.8mm, 0.9mm, 1.2mm, 2.0mm, (); A 1.3mm B 1.4mm C 1.5mm D 1.8mm 7) according to the electronic industry standard, the standard thickness of copper clad plate 0.2mm (0.8mm), 1.6mm, 3.2mm, etc.; A 0.3mm, B 0.4mm, C 0.5mm, D 0.6mm 8) components of the installation of the vertical installation, and (two); A horizontal installation, installation, C B side by side span installation, D installation of lying 9) leakage is not coupled to the core winding (or other); A B, C energy, residual inductance inductance, D current energy 10) pad shape (), round and square pad; A B C, empty oval, heart-shaped plum shaped, D shaped island 11) in switching power supply mode, which switch mode and economical and simple and practical? A, B, C push-pull forward flyback, D full bridge, half bridge E 12) miniaturization of the SMC element (Metric): 3225, 3216, 2125, 2012), (1608, 1005, 0603; A 3200, B 3016, C 2525, D, 2520 13) process map we say is mainly () printed circuit board, printed ci