广联达钢筋注意（Glodon reinforced note）.doc

广联达钢筋注意（Glodon reinforced note） Glodon reinforced note Setting calculation Not recommended for beginners to modify the computational setting information, unless you are clear on the modified reinforced impact calculation. The rotation point (point and length) Enter the angle values with positive counterclockwise, clockwise direction is negative. Newly build The user can input according to the actual situation of building underground floors, pay attention to the input value must be 0 ~ 50 integer, empty said zero layers underground. 8, on the ground floors: the user can input the actual situation according to the number of floor building on the ground, pay attention to the input value must be 1 ~ 500 integer, empty said floors above ground zero. With *, said this should not be empty, and the related computing. Steel information 1, if the selected reinforced type is not the same, then the steel grade, steel diameter data frame is gray, uneditable; 2, if you choose the same type of steel, different steel grade, diameter of reinforced bar data for ash uneditable; 3, only choose the same type, the same level of reinforced steel bar diameter, the data frame can be edited Programming rules In writing expressions, should pay attention to the following points: 1, all must be written in the form of linear expressions. Therefore the numerator and denominator, the index of small standard must be written on the same line. (as in the example of the 2 and 3). 2, can only use legal identifier. 3, must use the multiplication symbol * clearly pointed out, can not be omitted. 4, the independent variable can be arbitrary expressions. And the function arguments must be written in parentheses. 5, in order to specify the operation time, can use parentheses. The brackets must appear in pairs. And there is only one parenthesis (and). Do not use square brackets and braces. The locking member The information can not be locked after the reinforcement component changes, at the same time, the lo