封闭阳台注意事项（Closed balcony notes）.docVIP

封闭阳台注意事项（Closed balcony notes） Note that the closed balcony At present, the living environment is not ideal, such as noise, pollution and so on, the area of the balcony packaging by the majority of owners agree. In order to ensure the tightness of the balcony, it is recommended that you do not begrudge the cost too in the selection of materials. At present, the quality of the products and the construction technology of Aluminum Alloy are relatively mature. Closed balcony section thickness should be more than 1.2mm, experts recommend the use of sliding window. The color of windows, on its own terms, the thermal insulation effect and noise reduction functions are relatively high, if coupled with the use of double glazing, the effect will be better. Therefore, if the budget is more comfortable decoration, the use of color aluminum balcony packaging effect will be better. Closure of part of the balcony edge junction, to make water seepage, including a closed body quadrilateral, especially at present is the choice of glue, good quality plastic itself, also need to pay attention to is, closed out the form below to have out of the slope with seepage water. Is the main attention to installation, and to ensure that the gap between outer walls will not exceed 3mm, if the rail level, the gap will be too large, to make a foaming agent in large gaps, etc. after the foaming agent dry and then glue. The balcony itself is projecting from the wall, the technical requirements of supporting the project itself than the doors and windows should be fine, recommended to choose good quality manufacturers, workmanship can be guaranteed. In addition, the processing of color aluminum window of the self-employed more, in order to reduce costs, cut corners, shoddy products, many hidden dangers, suggest that the owners do, manufacturers recommend the use of regular Aluminum Alloy doors and windows products. The balcony window in the installation and use to pay attention to many problems. In the