服装制作流程（Garment making process）.docVIP

服装制作流程（Garment making process） The production process of garment production enterprises The garment factory production process can be divided into three aspects: Pre operation The first step of the operation from the start and not finish or cutting the original sample to receive a detailed plan to first analyze the sample and order of attention in the operation, to confirm the size, color and materials of finishing each use. The first is specifications, specifications can be divided into sample specifications, sample specifications, batch to do prenatal specifications. Which kind of style this specification is mainly used for designer style effect and production of materials used. The general case with similar fabric proofing, allowing substitute materials. The production plant is concerned, this specification is only available for quotation, in order to fight to get the real order, in the use of this form should pay attention to the content and specifications of each project, because the content and specifications are often the same costs directly associated with any help to reduce the cost and the basic requirements of methods and suggestions without changing the original clothing of the can slow recovery. All changes in specifications in the table of contents, must make notes, when before and after the next step in order to carry out the work of the corresponding. In addition, this kind of group office specifications are mainly used for playing group do like. Do batch sample production, according to the style of the sample and the sample specifications in specific requirements of each operation, check the sample fabric structure, specifications and measurement of all sizes, make sure each point size in the range of the allowable error. The style and specifications of the table to the related technical personnel, review the doubtful and difficult, in order to fully understand the samples. In principle, a batch to do with formal main materials and auxiliary materia