不锈钢工艺流程（Stainless steel process）.docVIP

不锈钢工艺流程（Stainless steel process） Stainless steel process Stainless steel process: if annealed stainless steel should be used to have NG-9-1 chemical black oil by NZ-B in electrolytic oil washing, polishing, degreasing Wang (the fluid as the coolant used directly, temperature 60 to 80 DEG C, the workpiece hanging anode current Da:20 ~ 15A/dm2, the cathode is lead antimony alloy (containing antimony 8%) time: 1~10 minutes, thrown bright) wash water 5 to 8% hydrochloric acid film (room temperature: 1~3 seconds) wash water to dry. Note: aluminum or titanium for fixture requires good electrical conductivity. The new solution is electrically treated before aging Stainless steel surface process: stainless steel has a variety of surface processing, broaden its application areas - different surface processing, so that the stainless steel surface is different, so that each of them unique in the application. The corrosion environment requires smooth surface for smooth surface is not easy to fouling. Deposition of dirt can make stainless steel rusty and even cause corrosion. In the spacious lobby, stainless steel is the most commonly used decorative materials for the elevator decoration, although the surface of the fingerprint can erase, but affect the appearance, it is best to use the appropriate surface to prevent leaving fingerprints. Sanitary conditions are important for many industries, such as food processing, catering, brewing and chemical processes. In these applications, the surface must be cleaned daily and chemical cleaning agents are often used. Stainless steel is the best material in this area, in public places, the surface of the stainless steel is often scribbles, but an important characteristic is it can be washed off, this is a remarkable characteristic of stainless steel is better than aluminum. Aluminum surfaces are easy to leave behind Traces are often hard to get rid of. When cleaning the stainless steel surface, it should be cleaned along the lines of stai