2012版最新玻璃艺术脱蜡铸造工艺（The 2012 edition of the latest glass art dewaxing casting process）.docVIP

2012版最新玻璃艺术脱蜡铸造工艺（The 2012 edition of the latest glass art dewaxing casting process） Dewaxing casting is the most difficult method in glass processing. But in the art of glass, it is also the best way to show the authors artistic ideas. The invention of dewaxing casting in ancient Egypt has been more than three thousand years old. Dewaxing process Also known as the lost wax method (PATE-DE-VERRE), has been widely used in the industrial production of metal materials of artistic creation, and re used in glass casting, but also a hundred years. In the mainland and Taiwan, it was only in these more than 10 years that glass lovers began to make glass art by means of dewaxing casting. Because of the constant investment, the time is short, but has been quite proud of the results, in the process of individual operations, has surpassed the level of European and American counterparts, attracted international attention and exchanges, invited to visit. In the field of metal material, precision casting and art creation, the wax casting process has become a familiar foundry technique. But in the field of glass art, is a relatively new technique; lost wax casting method -- first separating the wax and casting two words, the technical process is as follows: the design of good works, whether sculpture or semi relief sculpture is completed, with silica gel and silicone oil in proper proportion use the paint brush, brush in the homosphere sculpture, the sculpture average brush over silica gel. Depending on the size of the work, the gel setting time varies, usually about 2-4 hours, and large pieces of work even takes 10-24 hours. Silica gel and silicone oil must have a proper proportion in order to have good flexibility and durability. Conversely, the urgent need to complete the silica gel mold, plus an excessive amount of silicone oil or hardening agent, although it can greatly shorten the time of silica gel solidification, but it will lead to silicone ductility is not enough. When th