mess200用法（Mess200 usage）.docVIP

mess200用法（Mess200 usage） Application method of MESH200 unit of ANSYS Http:///wyslft/blog/item/77262fadf2d370f7faed506b.html 0 Preface ANSYS software is a general finite element analysis software. It is more and more widely used in aerospace, machinery manufacturing, automobile, transportation, railway, energy, chemical and other fields. A typical ANSYS analysis process is divided into 3 steps: model building, loading and solving, and analyzing the results. The first step is to build the model used to spend a lot of time on how to divide the grid geometry model, MESH200 unit and ANSYS software are provided by the auxiliary unit mesh used exclusively, this paper uses examples to illustrate the MESH200 unit usage, in order to generate geometric model of finite element model reference. 1 MESH200 unit description The MESH200 unit is the only unit that divides the mesh and has no effect on the results. This unit is used for several types of operations: Multistep mesh partitioning, such as unit extension, requires the generation of higher level units from lower level units. Mesh of a line with or without an intermediate node in a two-dimensional or three-dimensional space. The mesh of a face or body consisting of triangular, quadrilateral, tetrahedral, or hexahedral elements with or without intermediate nodes in a three-dimensional space. The MESH200 cell can select its geometry and node layout by setting the unit properties, and can refer to the ANSYS help file specifically. The MESH200 unit can be used with any other unit. It does not have degrees of freedom, material properties, real constants, or loads. Once the unit is not needed, it can be removed or left in the model without affecting the results. Using the EMODIF command, you can convert MESH200 units to other units. Application example of 2 MESH200 unit The MESH200 unit is often used for drag and sweep meshing. (1) drag mesh For example, a magnet for electromagnetic field analysis (see Figure 1), the mesh of the g