tpm的例子（TPM example）.docVIP

tpm的例子（TPM example） Abstract: This article mainly from the general situation of TPM implementation of the TPM entry point, the formulation of the TPM management system of the basic principles and key points for the modernization management of beer enterprises how to implement TPM (TPM) equipment management mode of the exploratory study. In the process of explaining the argument, the author uses many cases to discuss the importance of basic management standardization, system operability, PM group activities and timely training. Key words: TPM (full production, maintenance) modern beer equipment I. introduction: In the beer industry competition is increasingly fierce today, modern beer equipment has become increasingly sophisticated and sophisticated, almost all using PLC (programmable controller) automatic control, the implementation of assembly line operations. From the raw material input to output the finished wine to go through dozens of thousands of process control points, any intermediate point of failure may affect hundreds of tons or even thousands of tons of wine indicators, may also lead to the factory production and quality and yield losses caused by accidents. Therefore, as a successful model of equipment management, TPM (TPM) has been used more and more widely in many beer enterprises. Two, TPM profiles: TPM (Total Productive Maintenance), that is, total production and maintenance, is Japan in the study of American production and maintenance (PM) and the United Kingdom equipment management based on the development of. Early TPM mainly focused on reducing equipment failures and improving utilization. Todays TPM is transforming toward overall improvement in overall efficiency. Therefore, the new generation of TPM, also known as TQM (Total Profit Management).TPM process, but also the process of ISO standards, is the deepening and refinement of ISO, that is, total quality management. It can be said that TPM is not only the maintenance system of production cap