led室内照明（Led interior lighting）.docVIP

led室内照明（Led interior lighting） LED interior lighting catalog Summary LED principles of interior lighting: Characteristics of LED interior lighting Lighting terminology Edit this paragraph overview LED (LightingEmittingDiode), which is a light-emitting diode, is a semiconductor solid light-emitting device. LED It is [1] as light emitting materials by solid semiconductor chip in the semiconductor carrier occurs through release of excess energy complex caused by photon emission, directly emit red, yellow and blue, green, orange, purple, white light. LED interior lighting products use LED as a light source to produce lighting fixtures. At present, Sichuan Dengfeng LED lighting is the LED indoor lighting industry pioneer, Shanghai, World Expo, the London Olympic Games and reached a strategic cooperation agreement, Dengfeng LED indoor lighting entered the era of a new chapter. Edit this paragraph LED interior lighting principle: LED is made of semiconductors such as GaAs (Shen Huajia), GaP () and GaAsP (P, Shen Huajia), and its core is PN junction. Therefore, it has the characteristics of I- and N in general P-N junctions, i.e., forward conduction, reverse cut-off, and breakdown characteristics. In addition, under certain conditions, it also has luminescence characteristics. At the forward voltage, the electrons are injected into the P region from the N region, and the holes are injected into the N region by the P region. The minority carrier (minority) part of the incoming region is combined with the majority carrier (multiple daughter) to shine. Assuming that luminescence occurs in the P region, the injected electrons are directly combined with the valence band holes, or are first captured by the luminescent center and then combined with the hole. In addition to this light composite, some electrons are non luminescent center (the center between the conduction band, lies near the middle) capture, and then recombine with holes each release of energy is not, can not form a