Air Stripping in Industrial Wastewater Treatment （空气剥离在工业废水处理）.pdf

WATER AND WASTEWATER TREATMENT TECHNOLOGIES - Air Stripping in Industrial Wastewater Treatment - A. Srinivasan, P. Chowdhury, T. Viraraghavan AIR STRIPPING IN INDUSTRIAL WASTEWATER TREATMENT A. Srinivasan, P. Chowdhury, T. Viraraghavan Faculty of Engineering, University of Regina, Canada Keywords: Air stripping, Ammonia, VOC, Design, Packed tower. Contents 1. Introduction 2. Process description 3. Stripping theory 4. Design considerations 5. Design of Stripping Tower 5.1 Evaluation of Equilibrium Data 5.2 Estimation of Operating Data S S 5.3 Mass Balance Analysis S R 5.4 Selection of Column 5.5 Column Diameter and Pressure Drop Calculation L E 5.6 Estimation of Column Height or Number of Plates 5.6.1 Packed Tower Design O T 5.6.2 Plate Tower Design E P 5.7 Design Criteria 6. Ammonia Stripping – A 6.1 Air stripping 6.2 Steam Stripping H 7. VOC stripping O C 7.1 VOC Emissions during Wastewater Collection and Treatment 7.2 Sources of Organic Wastewater C 7.3 Removal of VOC by Air Stripping S E 7.4 Air Stripping Followed By Off Gas Adsorption L 7.5 Membrane Based Air Stripping E Glossary P Bibliography N Biographical Sketches U M Summary A S In the past, the major objectives of wastewater treatment were the removal of suspended solids, biochemical oxygen demand and coliform bacteria. It is only very recently that the removal of inorganic nutrients, such as nitrogen has been brought into focus. Municipal wastewater and many industrial wastes are among the principal contributors of these nutrients to s