AND8492 Capacitive Drop Drive Topology with （AND8492电容驱动拓扑）.PDF

AND8492/D Capacitive Drop Drive Topology with a Constant Current Regulator to Drive LEDs ON Semiconductor APPLICATION NOTE Abstract released a line of Constant Current Regulators (CCRs) that This Application note describes how to properly and improve efficiency and gain longevity of any end product efficiently drive light emitting diodes (LEDs) using a needing a constant current. Constant Current Regulator (CCR) in a capacitive drop LEDs use a combination of radiative recombination and topology, as shown below in Figure 1. The Capacitive drop localized well modification for recombination of electrons topology allows for a wide range of end applications while in the conduction band and holes in the valence band that the CCR will drive the LEDs at their optimal current to dissipate this energy in the form of photons of a specific improve longevity and reliability. The LEDs themselves and wavelength of light in direct band gap (i.e. III−IV the LED market is explored as a lead into the justification for compounds). As the recombination well gets thinner the this type of solution, the mathematical derivation of the energy state of the electron in the conduction band gets various components is reviewed, concluding with four higher since electrons cannot be at the bottom of a well due examples, 230 VRMS ±6% 50 Hz, (100 to 127 V) 113.5 V to quantum mechanics. This is shown in Figure 2 below. RMS ±12% 60 Hz, 120 VRMS ±5% 60 Hz and 240 VRMS ± 10% 50 Hz application. This application note will use the + a