Applications General gate valve service where （应用程序一般闸阀服务）.pdf

Applications General gate valve service where space is limited, weight needs to be minimised and non wedging bubble tight sealing is required. Available in nominal bore sizes from 2” – 16” in class ratings of 150–300. Ideal for use on tank farms, manifolds, terminals, jetties and platforms and any pipeline system. Suited for vacuum service, hot tapping and a wide range of temperature and sour corrosive duties. Product Description Features  Full round opening  No lubrication - no routine maintenance  Bubble-tight sealing from vacuum to full rated working pressure  Upstream and downstream seal under all operating conditions irrespective of flow direction  Automatic self relief of body cavity pressure resulting from thermal expansion in service fluids  Double block and bleed as defined by API 6D  Metal to metal primary seal  Seat rings incorporating a secondary elastomer O ring seal located in the gate and therefore out of the product flow  3 piece bolted plate design to achieve high strength to weight ratio and compact size  Rising stem suitable for all types of manual and powered automation  Pressure rated and fully tested to API 6D pipeline valve specifications The CORT C-G5 wafer gate valve has a compact body with integral flat ends which are drilled and tapped to suit the customers line flanges. The valve is opened by withdrawing a circular parallel slab gate including its floating seat rings into the upper part of the body cavity - out of product flow. When the gate is lowered into its preset closed position the seat rings are aligned to make a primary metal to metal seal without wedging against both the up and downstream bodyplate faces. The seats in the gate are floating and pressure energised such that the sealing action increases with increasing pipeline pressure. A secondary elastomer seal is incorporated into each seat in the gate and springs are provided to supply the sealing force to ensure bubbl