DEPARTMENT OF EEE QUESTION BANK PABIIT（部门银行PABIIT EEE的问题）.pdf

DEPARTMENT OF EEE QUESTION BANK (As Per AUC 2013 REGULATION) SUB CODE: EE6201 SUB NAME: CIRCUIT THEORY YEAR : I SEM : II PREPARED BY J.S.MEGAVATHI AP/EEE Unit-I Basics of Circuits Analysis PART-A 1. What is meant by linear and nonlinear elements? Linear element shows the linear characteristics of voltage Vs current. Nonlinear element the current passing through it does not change linearity with the linear change in applied voltage at a particular frequency. 2. What is meant by active and passive elements? If a circuit element has the capability of enhancing the energy level of a signal passing through i t is called an active element. Passive elements do not have any intrinsic means of signal boosting. 3. What is meant by unilateral and bilateral elements? If the magnitude of the current passing through an element is affected due to change in the polarity of the applied voltage is called unilateral elements. If the current magnitude remains the same even if the applied EMFs polarity is changed is called bilateral elements. 4. What is a dual network? In an electrical circuit itself there are pairs of terms, which can be interchanged to get new circuits. Such pair of dual terms is given below Current- Voltage Open- Short L-C R-G Series – Parallel Voltage source- Current source KCL-KVL 5. Define Ohms Law. The potential difference across any two ends of a conductor is directly proportional to the current flowing between the two ends provided the temperature of the conductor remains constant. 6. Mention the disadvantages of Ohm’s Law.  It does not ap