Design of Rogowski coil with integrator BGU（设计与集成商BGU Rogowski线圈）.pdf

Design of Rogowski coil Design of Rogowski coil with integrator with integrator Project on course: High voltage generation and measurement Lecturer: Dr. Alex Pokryvailo Student: Alex Kushnerov Ben-Gurion University of the Negev 2006 Design task and main advantages of the coil Design task and main advantages of the coil Data: Data: Ipk = 200kA, risetime = 100ns, low-frequency limit (3dB) 50Hz, accuracy 2%, coil length 0.5m The advantages of using a Rogowski coil to measure high currents (having sharp rise) are: ● Linearity and non-saturation because it is air-cored. ● Simple circuitry, construction and low price. ● Non-intrusive, i.e., the coil does not load the circuit carrying the current to be measured under certain conditions of impedance matching. The flux way independent output property The flux way independent output property The coil is placed round the conductor and can be shaped in arbitrary form provided only that the ends of the coil are brought together. As showed below its output voltage is independent on the magnetic flux way caused by a measured current. i = H cosα ⋅dl M = µ nA ∫ 0 dΦ =M ⋅H dl cosα Φ = dΦ ∫ Φ =M ∫H cosαdl =M ⋅i dΦ di V = − = −M ; coil