Design and Study of Four Speed Sliding Mesh （四个速度滑动网格的设计和研究）.pdf

SSRG International Journal of Mechanical Engineering (SSRG-IJME) –volume 2 Issue 6–June 2015 Design and Study of Four Speed Sliding Mesh Gear Box 1 Atthuru Manikanta Reddy , Aakash.k2 12Department of Mechanical Engineering, R.M.K. Engineering college, Anna University, Chennai, India ABSTRACT: This Paper deals with understanding and a counter shaft. In a four speed gear box of the gear transmission system principles with its (which includes one reverse gear), the counter shaft design and working. Different types of gears are has four gears which are rigidly connected to it. used in automobiles. Gears have teeth which mesh Clutch shaft has one gear and main shaft has two with each other to transmit the drive. A detailed gears. The two gears on the main shaft can slide in CAD(Computer-aided design) model has also been the horizontal direction along the splines of the developed according to the theoretical calculations main shaft. However, the gears on the counter shaft to validate the design and an brief study of the four cannot slide. The clutch gear is rigidly fixed to the speed sliding mesh gear box. clutch shaft. It is always connected to the counter shaft drive gear. Keywords -Gear Transmission, Meshing, CAD, Drive and Automobiles The two gears on the main shaft can be slide by the shifter yoke by operating the shift lever