大连某地三轴CD试验研究.docVIP

大连某地三轴CD试验研究摘要：三轴固结排水剪CD试验一般采用直径为3.91cm高度为8cm的3~4个饱和试样，三轴仪上在不同的周围压力作用下充分排水固结，在剪切的过程中打开排水阀并测读排水量，以0.003~0.012 %/min的剪切速率缓慢剪切，直到破坏或应变达到15%~20%为止。为地基土主要提供土的有效抗剪强度参数Cd、Φd等参数。 关 键 词：饱和试样；排水固结；测读排水量；强度参数 Abstract: General triaxial consolidation undrained shear CD test with a diameter of 3.91cm height of 8cm 3 4 saturated sample in different ambient pressure under triaxial adequate drainage consolidation in the shear processopen the drain valve and measured read a displacement of the slow shear the shear rate of 0.003 ~ 0.012% / min until the damage or strain to reach 15% ~ 20% so far. For the