紧固和剥线.docVIP

夹持、剥线和切割 Holding, Cutting 钳子Pliers, 剥线钳Wire Cutters, 镊子Tweezers, 锯子Saw etc When you make an electronic circuit, the work which does the component lead of parts straight or bends the lead or cuts the lead is needed. When handling a small part, the tool that the tip is sharp is needed. 钳子是一种用于夹持、固定加工工件或者扭转、弯曲、剪断金属丝线的手工工具。钳子的外形呈V形，通常包括手柄、钳腮和钳嘴三个部分。 ?钳嘴的形式很多，常见的有尖嘴、平嘴、扁嘴、圆嘴、弯嘴等样式，可适应对不同形状工件的作业需要。按其主要功能和使用性质，钳子可分为夹持式钳子、钢丝钳、剥线钳等。 Needle Plier This is the plier with thin cutting tip. It is very convenient to restrain, and also to hold the parts at narrow place. It is used to make straight the component lead. I think that a smaller one is convenient than a big one. This tool is necessary to electronic circuit making. 尖嘴钳又叫修口钳，主要用来剪切线径较细的单股与多股线，以及给单股尖嘴钳导线接头弯圈、剥塑料绝缘层等，它也是电工（尤其是内线电工）常用的工具之一。它是由尖头、刀口和钳柄组成。电工用尖嘴钳的钳柄上套有额定电压500V的绝缘套管。尖嘴钳由于头部较尖，使用与狭小空间的操作使用用尖嘴钳弯导线接头的操作方法是：先将线头向左折，然后紧靠螺杆依顺时针方向向右弯即成。 Wire Cutter (Nipper)（diagonal cutting pliers） This tool is used when cut the wire or cut the component lead. The one that the top is pointed is good. Even this, the small one is convenient. There is a type that a ditch for the wire cut is put to the blade. It isnt possible to use when the thickness of the wire doesnt fit. Be careful so as not to be injured because the blade is sharp. This tool is necessary to electronic circuit making. 螺丝刀（起子）Screwdriver The tip of the screwdriver has various shapes. Plus, Minus, Box, Gimlet.... Recently, the plus screw is often used. But the usage of a screwdriver is not only tightens, loosen a screw. I might do the case force open. In that case, the minus style screwdriver is useful. There are several kinds of sizes at the tip of driver. In the case of a plus screw, it is necessary to use the driver suitable for size especially. Otherwise, the slot of the head of a screw may be broken. The screwdriver of the photograph right edge is a screwdriver for adjustment frequency. It is called Trimming screwdriver . Only the top is made wi