Gear Meshing Transmission Analysis of the （齿轮啮合传动的分析）.pdf

Research Journal of Applied Sciences, Engineering and Technology 5(8): 2636-2641, 2013 ISSN: 2040-7459; e-ISSN: 2040-7467 © Maxwell Scientific Organization, 2013 Submitted: September 07, 2012 Accepted: October 05, 2012 Published: March 15, 2013 Gear Meshing Transmission Analysis of the Automobile Gearbox Based on the Software MASTA 1, 2Yongxiang Li, 2Wenquan Shen, 2Yi Cai, 2Weiqiang Xia and 1Fujin Yu 1Zhejiang Normal University, Jinhua, Zhejiang, 321004, China 2Zhejiang Wanliyang Transmission Co. Ltd, Jinhua, Zhejiang, 321025, China Abstract: As the main drive components of the automobile manual gearbox, the effect of gear meshing plays an important role on transmission performance. Aiming at the existing problems of the traditional gear meshing analysis, the study take a five-speed gearbox as an example, based on the MASTA software, a professional CAE software for simulating and analyzing the gearbox, to accomplish the gear mesh analysis of the automobile gearbox. Further more, the simulation modeling of the gearbox is built to simulate the actual load conditions and complete the process of analysis for the gear. It is indicated that a new design concept is put forward, that is, using specialized software MASTA for transmission modeling and simulation analysis can heavily improve the design level of the gearbox, reduce the test times and shorten the period of research and development as well. Finally, it can provide references for the development and application of new transmission gear. Keywords: Gearbox, gear mesh, MASTA, simulation model INTRODUCTION complex, the calculation process is correspondingly