Gearboxes Worm Gear Speed Reducers Omega （变速箱蜗轮减速器ω）.pdf

Gearboxes Worm Gear speed reducers HDR Series l8 Ratios Available from 5:1 to 60:1 l7 Gear Box Sizes from 1.33 to 3.25 lUniversally Interchangeable Design for OEM Replacement lDouble Bearings Used on Both Shaft Ends HDRF133-20/1-R-56C right hand flange mount gearbox with box size 133, lAnti-Rust Primer Applied Inside mounts directly to 56C-frame motors shown smaller than actual size. and Outside Gearbox lShaft Sleeve Protects All Shafts lS45C Carbon Steel Shafts Applications l Food Processing lWarehouse Material Handling lConveyors (Belt, Direct-Drive, Flange input, shaft Flange input, shaft Inclined, etc.) output, left hand output. output, right hand output. lPackaging Machinery (Shrink Wrappers, Stretch Wrappers, Case Sealers, etc.) lSpecial Machinery The HDR Series worm gear reducers are Flange input, shaft used in low to moderate horsepower output, double end output. Flange input, hollow bore output. applications to reduce speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C flange mount with either right, left or dual output shafts or a hollow bore output. The indirect drive models are shaft input- shaft output boxes for use with sprocket or pulley drive systems. They provide an effective low cost solution to speed reduction and increased torque, with higher tolerances for shock loading than helical Shaft input, shaft Shaft input, shaft output, right hand output. output, left hand output. gear reducers.