Glass reinforced plastic vessels and tanks（玻璃钢船和坦克）.pdf

Health and Safety Executive Glass reinforced plastic vessels and tanks Advice to users Guidance Note PM75 (Third edition) This guidance is issued by the Health and Safety Executive. Following the guidance is not compulsory and you are free to take other action. But if you do follow the guidance you will normally be doing enough to comply with the law. Health and safety inspectors seek to secure compliance with the law and may refer to this guidance as illustrating good practice. Guidance Notes are published under five This is a web-friendly version subject headings: of leaflet PM75 (Third edition) Medical Environmental Hygiene Chemical Safety Plant and Machinery General 1 of 18 pages Health and Safety Executive Scope 1 HSE has produced this good practice guidance note in consultation with industry. It outlines essential requirements to safeguard against the failure of glass reinforced plastic (GRP) tanks, vessels and scrubbers in service. 2 This document gives guidance on the specification, design, manufacture, transportation, installation, operation and inspection of GRP vessels and tanks, both with and without thermoplastic liners. It is for al