Guide to Contamination Standards ParkerHFDE（污染标准ParkerHFDE指南）.pdf

g Guide to Contamination Standards Part number: DD0000015_GB_Rev- © 2011 Parker Hannifin Corporation /hfde Contents Introduction 2 Contamination basics 3 ISO codes (hydraulic fluid contamination) 4 Suggested acceptable contamination levels 5 ISO codes (fuel contamination) 6 Typical reporting: particle sizes 6 NAS 1638 table 7 SAE AS4059 rev E table 8 GOST 17216-2001 table 9 NAV AIR 10-1A-17 table10 ISO/NAS/SAE code comparison table 10 PPM Conversion table 11 Introduction This guidebook is aimed at engineers, technicians and quality control personnel involved in contamination control. Its purpose is to make available accepted and widely-used cleanliness specification levels for liquid samples. The tables in this guide allow users of using automatic portable particle counters to see the relationship between raw particle counts at various sizes and the reporting code numbers of various contamination standards. A NOTE ON THE FIGURES USED Note that some of the table entries are defined as cumulative counts (e.g. “ 6µm”) and others are defined as differential counts (e.g. 6–14µm”).