Insulating Materials List - Professional Plastics（绝缘材料清单专业的塑料）.pdf

COMMON INSULATING MATERIALS AVAILABLE FROM PROFESSIONAL PLASTICS Professional Plastics offers a full-range of insulating materials found in electronic and electrical equipment. 12 Insulating materials are typically considered to be materials with a surface resistivity greater that 10 Ω/sq (ohms per square) INSULATING MATERIALS A.B.S.: Acrylonitrile, butadiene, and styrene combine to form this common plastic often used to make housings or other mechanical parts. ACETATE: Acetates have good electrical insulating properties and is the material used to make movie and microfilm. ACRYLIC: Acrylite, Lucite and Plexiglas are trade names for acrylic which has widespread use where toughness and transparency are required. Solvent cement is quite effective for welding pieces together. CERAMIC: Ceramics are used to fabricate insulators, components, and circuit boards. The good electrical insulating properties are complemented by the high thermal conductivity. These include Macor ®, Alumina, and others. DELRIN: This Dupont acetal (POM) resin is made from polymerized formaldehyde and finds uses similar to nylon. The material is rigid and has excellent mechanical and electrical properties making its use common in appliances and electronics. EPOXY/FIBERGLASS: This laminate is quite common due to its superior strength and excellent electrical properties even in humid environment. Most modern circuit boards are made from a grade of epoxy/fiberglass. (Grades include G10/FR4 and G11/FR5 extended temperature grade.) FEP: is a relatively soft thermoplastic with lower tensile strength, wear resistance, and creep resistance than many other engineering plastics. However, FEP is chemically inert and has a low dielectric constant over a wide frequency range. FEP possesses a very high degree of stress crack resistance, a low coef