INTERNATIONAL STANDARD 9013 plasmainfo.ru（国际标准9013 plasmainfo.ru）.pdfVIP

INTERNATIONAL ISO STANDARD 9013 Second edition 2002-09-15 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances Coupage thermique — Classification des coupes thermiques — Spécification géométrique des produits et tolérances relatives à la qualité Reference number ISO 9013:2002(E) © ISO 2009 - This is a single-user license for personal use only. All other uses prohibited. © ISO 2002 ISO 9013:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. © ISO 2002 All rights reserved.