Product Overview Solstice Energy（产品概述夏至能量）.pdfVIP

Latchways Solar Panel Support Post™ Product Overview Introduction With the ever increasing requirement for This document sets out to explain the key selection criteria behind renewable energy, the use of a building’s roof as the post with each element supported by an explanation to assist a generator of power and subsequent revenue the decision making process. stream has become more viable and principally linked with the installation of solar panels. Latchways success in the Fall Protection Checklist market has been based on innovative fixing and load control technology which is utilised in the ™ ✓ ‘Top fixed’ solution Latchways Solar Panel Support Post . The post enables solar panels to be ‘top fixed’ to the complete roofing system rather than the more traditional ✓ Retrofit and new build methods of attaching the support post through the roof to the building structure. Although particularly suited to metal roofs, the post also negates ✓ Roofing system the use of unsightly concrete counterweights used to hold down the panels on warm flat membrane roofs. Such weights impede manufacturer approval drainage, cause localised ponding of water and subsequent build-up of algae, over-compress the supporting insulation and can be prone to ‘slippage’ causing critical misalignment of the ✓ 2.5 kN tensile load panels. Furthermore, leading membrane manufacturers will generally require the use of an additional isolation layer between capacity per post the weight and the membrane adding cost to the final installation. ✓ Unique ‘Overload’ f