摩托车防盗器使用说明.DOC

Motorcycle Alarm Instructions Function keys Status Function Operating Explanation Setting key The usual Security alert Gently press one When speaker calls out, it will automatically enter the security state after 3 seconds 1.Pre-alarm: Speaker calls out, it will automatically enter the security state after 3 seconds 2 Emergency alarm: In the alert state, you can force attempt to open it with a key locomotive horn Naruto, at the same time, engine lock can not start. Driving Snatches Gently press Speaker Great Naruto 1.5 seconds, the direction of light rapid flash. Release key Warning Released theft Gently press one Direction lights flash twice, speakers called twice Remote start moving Remote flameout Powered down immediately Start button The usual or Warning Remote Start Gently press two Locomotive immediately start.If the cold start is unsuccessful, repeat the above procedure: (Note:electric door lock has no effect in the open state Find car keys Driving Overtake Gently press one Speakers called 1.5 seconds, turn signals flash synchronization to show overtaking The usual or Warning Searching cars Gently press one Speakers called 1.5 seconds, where the owner told press any key to stop Released orthe security state Remote control to adjust the vibration sensitivity Press 2.5 seconds Press the button 2.5 seconds,release until a beep,into four vibration sensitive cycle regulation. (The first level is slow, Alert tone is one.The fourth stage is the most sensitive and Alert tone for the four tones,after a beep, should press the key to confirm the selected level) Notes: 1.remote control system precision manufacturing, please do not drop or soaking, 2.when the distance of remote control becomes shorter or lights dim, please replace the batteries. The following are not included in the warranty: 1 alarm speakers, remote control, host have fault due to flooding. 2 natural damage of the battery. 3 Themselves removable circuit board parts