Phoenix_螺旋锥齿轮磨齿机加工仿真系统的研究_王志永.pdf

DOI:10.16182/j.cnki.joss.2009.13.036 第21 卷第 13 期 系 统 仿 真 学 报© Vol. 21 No. 13 2009 年7 月 Journal of System Simulation Jul., 2009 Phoenix Ⅱ螺旋锥齿轮磨齿机加工仿真系统的研究 王志永，曾 韬 (中南大学机电工程学院，长沙 410075) 摘 要：分析了螺旋锥齿轮磨齿加工的基本原理，以AutoCAD 为开发平台，利用AutoCAD 内嵌 的VBA 编程语言，建立了基于尺寸驱动的齿坯和砂轮的实体模型，将Phoenix 二型数控螺旋锥齿 轮磨齿机的各轴运动转化为砂轮和齿坯的相对位置调整，通过砂轮与齿坯之间的相减布尔运算模 拟磨齿加工过程，通过仿真实例验证了仿真算法的正确性。所开发的磨齿加工仿真系统，为精确生 成齿轮的三维实体模型以及验证机床调整参数提供了解决方法。通过将传统机械式机床的调整参 数转化为基本机床调整参数，也可以利用该仿真系统生成齿轮的实体模型。 关键词：螺旋锥齿轮；磨齿机；加工仿真；系统 中图分类号：TP391.9 文献标识码：A 文章编号：1004-731X (2009) 13-4171-03 Research on Machining Simulation System of Phoenix Ⅱ CNC Spiral Bevel Gear Grinding Machine WANG Zhi-yong, ZENG Tao (College of Mechanical and Electrical Engineering, Central South University, Changsha 410075, China) Abstract: The general machining principle of spiral bevel gear grinding process was analyzed. Based on AutoCAD development platform and made use of VBA programming language embedded in AutoCAD, the dimension-driven solid model of the workpiece and grinding wheel was created. By transforming the motion of CNC axes of Phoenix grinding machine into the relative position adjustment between the workpiece and grinding wheel, the grinding process was simulated by subtraction Boolean operation. Comparing simulation result with p