铃木FA50轻便摩托车油门线拆解 - iFixit.PDF

Suzuki FA50 Moped Throttle able Teardown Suzuki FA50 Moped Throttle Cable Teardown Written By : Miroslav Djuric © iFixit — BY-N -SA www.iFixit .com Page 1 of 7 Suzuki FA50 Moped Throttle able Teardown INTRODUCTION This is actually a reverse teardown -- a build-up, you could say -- of a Suzuki FA50s throttle cable. This was the best method I could think of to describe the stuck throttle cable problem Ive been experiencing with my moped. © iFixit — BY-N -SA www.iFixit .com Page 2 of 7 Suzuki FA50 Moped Throttle able Teardown Step — Suzuki FA50 Moped Throttle Cable Teardown  Here is the assembled throttle cable. It seems to be assembled correctly , but certainly does not function properly . © iFixit — BY-N -SA www.iFixit .com Page 3 of 7 Suzuki FA50 Moped Throttle able Teardown Step 2  The throttle parts.  The only logical way for me to assemble these parts were:  Insert needle into gold-colored cylinder.  Insert retaining clip on top of needle.  Then compress and insert the spring (see following steps on how the spring was inserted). © iFixit — BY-N -SA www.iFixit .com Page 4 of 7 Suzuki FA50 Moped Throttle