磁带备份hpux.docVIP

用make_recovery磁带恢复操作系统 1. Power up the server 3. Upon seeing the following prompt in the console screen, press any key on the keyboard to interrupt the auto-boot process …. To discontinue, press any key within 10 seconds. …. 4. You should see the following prompt when the auto-boot process is interrupted Main Menu: Enter command ; 5. Insert the latest system backup tape. 6. You can use command sea to search to bootable media. Note the device type “Sequential access media”, which indicates it is the bootable tape. Then boot from it. Main Menu: Enter command ; sea Searching for potential boot device(s) This may take several minutes. To discontinue search, press any key (termination may not be immediate) Path# Device Path (dec) Device Path (mnem) Device Type ------------------------------------------------------------------- P0 0/0/1/0.3 extscsi.3 Sequential access media P1 x/x/x/x.x extscsi.2 Random access media P2 x/x/x/x.x intscsia.6 Random access media …… 9. Type in the boot command: Main Menu: Enter command ; boot p0 10. The bootstrap of the tape will be loaded into memory until you see the following question Interact with IPL (Y, N, or Cancel)? ; 11. Answer N to follow the automatic recovery of the Production Server 12. The following message will then be display. Press Return; key to acknowledge the message and continue the recovery process. Press Return to continue: 13. The following message will then be display. Press Return; key to acknowledge the message and continue the recovery process. …. [ Install HP-UX ] [ Run a Recovery Shell ] [ Advanced Options ] …. 14. Use the Up;, Down;, or Tab; keys to navigate and highlight the Install HP-UX option, and press Return; key to select the option. The system will then display the next screen. Use the Tab; key to navigate and Space Bar; key to select the following options. Once the options are selected, use Tab; key to navigate to [OK] and press Return; to acknowledge ok