韦巴斯特夹具和检具标准.docVIP

Webasto Roof Systems 韦巴斯特车顶系统 Gauge and Check Fixture Standards 夹具及检具标准 Table of Contents目录 Introduction介绍 Design设计 Gauge and Fixture Design Approval 夹具及检具设计认可 Design Property of 设计之所有权 Swing Template Protection 旋转卡板的保护 Gauge and Fixture Base Protection 夹具及检具底座的保护 Net Surfaces and Datum’s 型面和基准 Flush Checks 齐平面检测 Go/No-Go Size Pins 通止规 Hole Location Pins 孔的位置度检测销 Coned Datum Pins 定位销 Feeler Checks 轮廓面检测 Gauge and Fixture Construction Material 夹具及检具制造材质 Doweled Details 销钉资料 Dimensional Data Needed for Construction 必要的制造数据 Base Flatness 底板 Master Set Block 调整块 Variable Data Collection Points可变资料汇集的要点（基准孔） Build 制造 Certification and Property Tag 证明及性质标签 Gauge and Fixture Weight and Handling Hooks 夹具及检具负重的吊钩 Gauge and Fixture Built to Car Position 夹具及检具的装车位置 Designation Points for CMM CMM的指定点 Base Start Corner 底部基准块 Fixture Paint Color 检具色标 G0/N0-Go Pin Hardening and Identification 通止规的淬火及辨别 Trim Sight Check Lines 目测线 Pin and Loose Detail Attachment 销子和松散件 Feeler Material and Clamp Requirements 间隙片及夹钳的要求 Standard Indicator 百分表 Indicator Storage 百分表的储物盒 Approval 认可 Design Sign Off 设计认可完成 Gauge and Fixture Source Certification 夹具及检具的原始证明 Final Acceptance Gauge RR RR最终认可 Introduction 介绍 The intent of this standard is to specify Webasto Roof Systems requirements for design, build, certification and approval of gauges and check fixtures. This in not an all inclusive listing. OEM customer standards will also apply to gauges and check fixtures for end item parts. 此标准意在阐述韦巴斯特关于夹具和检具在设计，制造认可中的系统要求。这个目录并未包含全部的标准。OEM客户的标准同样适用于成品零件的夹具和检具。 Gauges and check fixtures are a vital element to our quality management system. They are used to confirm dimensional conformance of parts and assemblies to facilitate effective process control. Every consideration must be given to assure they meet the following fundamental requirements: 夹具和检具是我们的质量管理系统中的一个重要元素。他们用来确保零件的尺寸和装配一致性以使程控更加有效。为保证符合根本要求,以下每一个要点都需要考虑到。 Accessible features which allow the user to readily check all