发动机热管理系统优化毕业课程设计外文文献翻译.docVIP

Optimization of engine thermal management system Engine thermal management is from the angle of the whole system, integrated control engine, turbocharger and exhaust, cooling system and engine cabin heat transfer etc., improve circulation efficiency, reducing heat load, change control engine components of high and low temperature limit, temperature distribution and regularity, improves the cooling capacity of the engines colleagues, keep the engine in good power nature, economy and emission performance and reliability. Application of engine thermal management system technology, can effectively heat transfer system involved in the engine as a comprehensive system of consideration and get the accurate boundary parameters of the engine each fluid system, precise control of temperature and heat flux of each system, can guarantee the safe and efficient operation of the key components and system control. And the optimization of the heat transfer process, reduce the size and power consumption of cooling system, reasonable utilization of heat energy, reduce waste emissions, improve energy efficiency, reduce environmental pollution. There is significant difference between engine thermal management and traditional engine cooling system. From engine cooling to engine thermal management is not only a technological progress, but also a breakthrough in management and design ideas. Engine thermal management technology has become an important measure of engine energy saving, emission reduction, power performance, reliability and engine life. The cooling fan mechanical drive cooling system in the traditional fan from the engine crankshaft through a belt drive, the cooling air depends on engine speed and engine speed is proportional to, rather than the actual engine operation cooling capacity, unable to accurately control the air flow through the radiator, thereby it is difficult to make the engine work in the best temperature, resulting in emissions is too high, the fuel econom