纺织纱线--英语和翻译.ppt

紧密纺;1.Profile of Compact Spinning Yarn;2.Yarn spinning principle; Fiber roller front output rear, first going to the special suction tube jacket mesh eyelids, eyelid ring movement in the net, due to contraction of the air flow and the aggregation function, through special pipe suction shroud the agglomeration, turning gradually from the flat ribbon into a cylinder.; The head of the fiber are twisted into yarns, yarn very close, smooth yarn appearance, less hairy. Compact spinning high strength, less Hairiness. Most easily sanded in the weaving process.; Compact spinning yarn twisting is the purpose of the former parallel and as close as possible between the fiber, high quality compact yarn is an important criterion. The fiber is parallel and consistent as possible before twisting its advantage on the assumption.;3.Advantages of compact spinning;（2）Because every single fibers in the spinning is twisting under straight and parallel, at the time of single yarn tensile, basically the same single fibers mechanical, compact spinning higher strength than the traditional single yarn. ;（2）Compact spinning process, the yarn is done in the process gathered after the drafting of the provisions, so its unevenness, indicators have not improved, and twisting roller clamp while twisting fiber inner and outer shifted strongly without the traditional craftsmanship, so compact yarn unevenness, rough and detailed indicators is better than traditional yarn.;（3）Compact yarn less hairy, so ease pressure on operations such as sizing, Singeing, shuttleless loom weft greatly reduced when using compact yarn, weft resistance to improve loom efficiency.;4.Shortcomings of compact spinning;（2）Indicators in addition to Hairiness has a lot of room for improvement, yarn of other indicators such as dry, rough and detail improvements at a modest rate.;