2013 NATEF Maintenance and Light Repair Task （2013年NATEF保养和轻型维修任务）.pdf

2013 NATEF Maintenance and Light Repair Task List Correlation Chart The following chart correlates the Modern Automotive Technology IRCD Lesson Plans (©2014) to the 2013 NATEF Maintenance and Light Repair (MLR) Task List. ENGINE REPAIR For every task in Engine Repair, the following safety requirement must be strictly enforced: • Comply with personal and environmental safety practices associated with clothing; eye protection; hand tools; power equipment; proper ventilation; and the handling, storage, and disposal of chemicals/materials in accordance with local, state, and federal safety and environmental regulations. Task Number and Description Priority Lesson Plan # I. ENGINE REPAIR A. General 1. Research applicable vehicle and service information, vehicle P-1 7, 9, 11, 26 service history, service precautions, and technical service bulletins. 2. Verify operation of the instrument panel engine warning P-1 36 indicators. 3. Inspect engine assembly for fuel, oil, coolant, and other P-1 9, 40, 48, 50, 56 leaks; determine necessary action. 4. Install engine covers using gaskets, seals, and sealers as P-1 8, 60 required. 5. Remove and replace timing belt; verify correct camshaft P-1 60, 61 timing. 6. Perform common fastener and thread repair, to include: P-1 8 remove broken bolt, restore internal and external threads, and repair internal threads with thread insert. 7. Identify hybrid vehicle internal combustion engine service P-3 27 precautions. I. ENGINE REPAIR B. Cylinder Head and Valve Train 1. Adjust valves (mechanical or hydraulic lifters). P-1