Basic CommandLine Interface Commands Cisco（基本的命令行接口命令思科）.pdf

Basic Command-Line Interface Commands This chapter describes the commands used to enter and exit the various Cisco IOS configuration command modes. It provides a description of help features, command-line interface (CLI) navigation commands, and the command history feature. The CLI allows you to enter partial Cisco IOS configuration commands. The software recognizes a command when you enter enough characters of the command to uniquely identify it. For user interface task information and examples, see the “Using the Command-Line Interface” chapter of the Release 12.2 Cisco IOS Configuration Fundamentals Configuration Guide. Cisco IOS Configuration Fundamentals Command Reference 78-11740-02 FR-3 Basic Command-Line Interface Commands disable disable To exit privileged EXEC mode and return to user EXEC mode, or to exit to a lower privilege level, enter the disable EXEC command. disable [privilege-level ] Syntax Description privilege-level (Optional) Specific privilege level (other than user EXEC mode). Command Modes EXEC Command History Release Modification 10.0 This command was introduced. Usage Guidelines Up to 16 security levels can be configured using Cisco IOS software. If such levels are configured on a system, using this command with the privilege-level op