Build Manual Sample Almac（构建手册Almac示例）.pdf

Almac Cars Dear customer Many thanks for purchasing these assembly instructions. We believe that they set new industry standards for clarity, content and presentation. We hope that after reading them you feel confident enough to purchase a kit (if you have not done so already). We hope that you find these instructions clear, concise and informative, but some customers do get “stuck” at some stage, so remember that if you have any problems we can be contacted by phone during normal working hours. Otherwise you can e-mail almaccars@paradise.net.nz Yours sincerely Alex McDonald Almac Cars P.O. Box 40-483, Phone/Fax (04) 528-8680, NICOLAUS STREET, UPPER HUTT, NEW ZEALAND ASSEMBLY Section 2 2 INSTRUCTIONS Parts Required 2-1 DONOR CARS 2-4 GUIDE TO WHAT YOU NEED (* = Supplied by Almac) The Mazda MX5 1989 -1998 is the donor car that is used Aluminium panels though later cars can be also be used. * Front top and bottom wishbones * Front top wishbone ball joints The simplest build is to buy a * Rear suspension bracket car with body damage and * Steering intermediate shaft remove all the mechanical Steering coupling—Mazda 323 components and electricals. Intermediate shaft bearing