Butt Fusion Welding of HDPE Pipes（屁股熔焊的HDPE管道）.pdf

Butt Fusion Welding of HDPE Pipes Work Procedure A pipeline is as good as its weakest point. Accordingly it is not only important that quality pipes and components are used in a piping system, but also the methodology used to join the pipes and other components. Butt Fusion is the most important and widely used method of connection for HDPE pipes larger than 110 mm. It is a method of jointing pipe ends by way of heating and cooling under pressure, resulting in pipe joints as strong as the pipe itself. The principle of butt fusion is to heat the pipe ends to a designated temperature (200220 C) under pressure for a specified amount of time, then the pipe ends are fused together under pressure for a period of time. th 4 Floor Nexor Bldg., 1677 Quezon Avenue, West Triangle, Quezon City, Philippines Tel. Nos.: (02) 9275441 / 3868056 / 4104288 * Telefax No.: (02) 4150143 * admin@ STEP WORKING PROCEDURE 1. Preparation of welding: before you start the operation, it is important to