Consumables Hardfacing BOC World of Welding（焊接消耗品耐磨堆焊,中行世界）.pdf

Consumables 8 Hardfacing Millions of dollars worth of equipment is thrown away each year Processes because it no longer performs efficiently. The standard welding processes employed during both reclamation A large percentage of this equipment could, however, be and preventative maintenance may include: protected by hardfacing or reclaimed by welding. In many cases, 1� Manual metal arc welding (MMA) the degeneration of the equipment could have been stopped if 2� Gas shielded metal arc welding (GMAW) preventative maintenance was carried out as a matter of routine. 3� Submerged arc welding (SAW) There should be differentiation between repair welding, reclamation and preventative maintenance. 4� Flux cored arc welding (FCAW) • open arc Repair Welding • gas shielded Repair welding is aimed at repairing structural damage, such as fatigue, cracks, fractures etc. The principle governing repairs • submerged arc is normally based on either matching the welding consumable The biggest advances have been made in the area of flux cored chemically or mechanically (tensile strength, proof stress, elongation welding consumables. It is also the area that has the widest selection etc) to the base metal.