CYLINDER HEAD BOLTS AND INSTALLATION（缸头螺栓和安装）.pdfVIP

CYLINDER HEAD BOLTS AND INSTALLATION TIPS AND PRACTICAL INFORMATION AFTERMARKET Victor Reinz and the Victor Reinz trademark are property of Dana Limited and used under license to MAHLE Clevite Inc. Cylinder Head Bolts – Strong Joints for Perfect Sealing Connecting Element Cylinder head bolts are the connecting elements between Area with high bolt force engine block, cylinder head gasket, and cylinder head. The bolt tightening force is an important Area with low bolt force factor for the mutual sealing of the combustion chamber, oil and coolant channels, and the ambient air – a task that must be performed perfectly with cold or extremely hot engines, at negative and high positive pressures. Surface Pressure When tightening (torquing) the cylinder head bolts, the bolt force generates the so-called surface pressure, which is essential for achieving a perfect seal. Hereby, and in combination with the applied torquing method, the bolts have a strong effect on surface pressure quality. When torquing the cylinder head bolts, the bolt force generates a surface pressure, which is essential for achieving a perfect seal. Surface pressure describes the force per unit of c