DECK SPECIFICATION WORKSHEET （甲板规范工作表）.pdfVIP

Deck Designer Specification Worksheet www.DIY All rights reserved, copyright ©2000 DIY Deck Designer Specification Worksheet Please answer the following questions accurately and completely. All questions must be answered in order to begin designing your deck. REMEMBER: BE SURE TO CHECK YOUR LOCAL CODES AND BUILDING REQUIREMENTS BEFORE DESIGNING. For the custom design of your new deck, we will need some basic information. Please accurately measure the side(s) of your home where the deck is to be built. Measure and indicate the placement of any existing obstructions such as chimneys, trees, etc. Please answer the following: 1. Don’t waste your time and money. In order to be sure your deck is designed to meet local building codes, you must determine the proper load requirements for your deck. It is your responsibility to research these loads with a professional in your area and verify that the selected load meets code. A simple call to your local municipality will get you the right answer. Do not guess here! Live load for deck and stairs: ❏ 40 PSF ❏ 60 PSF Static load for deck and stairs: ❏ 10 PSF ❏ 20 PSF 2. What is the height from the ground to the top of the finished deck floor? (Note: if your deck sits on uneven ground, choose the larger of the two height dimensions). ❏ 24” ❏ 48” ❏ 72” ❏ 30” ❏ 54” ❏ 84” ❏ 36” ❏ 60” ❏ 90” ❏ 42” ❏ 66” ❏ 96” 3. What type of post footer is required? ❏ Concrete pier ❏ Post IN concrete ❏ Post ON concrete www.DIY