650对辊式压密机设计.docVIP

Tutor: Kang Hongwei 650 Pressure ball machine is used for powder into a ball of equipment, which are mainly used in metallurgical lime sieve of material, iron oxide and of all kinds of material in the ball production, the ball is in the original machine pressure phi high pressure ball machine based on improving the design, the design improvement can pressure on dry pressing machine can ball pressure ball, design increases the pressure of extrusion machine to torque and increase the feed for, and the hydraulic system to do the design, because the double transmission covers an area of big, the way to request, makes the ball machine more compact Due to the different kinds of material molding, it required is great for adapting to the compression ratio this request, to pressure the motor control motor sliding through the pressure of the spiral speed to change, realize the purpose of the feed and change, the speed adjustment way by hand control, through the test enginery industrial experiments prove, forming units pressure and for shoes have close relations, and total pressure and has no obvious direct relation So dont have to use the total pressure of the variation of the speed, the basis of the main motor can observe the variation of working current speed as the basis, the main motor through two speed by pulley, such as must increase feed can take for spiral bushing change into large diameter spiral can. Key words: Pressure secret machine, Molding materials, extrusion pressure  1绪论 1 1.1压密机的重要性 1 1.2 压密机的发展现状 1 1.3压密机在工业中的作用 2 1.4压密机设备构造及构造的具体分析 2 1.4.1压密机的三大系统 2 1.4.2 压密机的工作过程 3 2基本参数的确定 5 2.1电动机的选择 5 2.1.1选择电动机的类型和结构形式 5 2.1.2选择电动机的容量 5 2.2传动比的计算及分配 5 3 v带带轮设计 7 3.1设计功率 7 3.2选定带型 7 3.3传动比 7 3.4小带轮的基准直径 7 3.5大带轮的基准直径 7 3.6带速 7 3.7初定轴间距 8 3.8所需基准长度 8 3.9实际轴间距 8 3.10小带轮包角 8 3.11单根v带传递的基本额定功率 8 3.12传动比i≠1时的额定功率增量 8 3.13v带的根数 9 3.14单根v带的预紧力 9 3.15作用在轴上的力 9 3.16带轮的结构和尺寸 9 4基本参数计算 10 4.1各轴的转速 10 4.2各轴功率 10 4.3各轴转矩 10 5轴的设计计算 11 5.1轴材料的选择 11 5.2计算Ⅲ轴最小轴径 11 5.2.1Ⅱ-Ⅲ段的直径确定